1nz Ecu Pinout -

The 1NZ-FE uses a simple ON/OFF VVT-i. The ECU pin E5-12 (VVT Solenoid) sends a ground signal to advance cam timing. At idle, duty cycle is 0%; under load, it pulses. Actuator Outputs (Making the Engine Run) These pins are where the ECU controls the mechanical parts. Do not use a standard test light on these; use a Logic Probe or LED test light (low current).

| Component | Connector | Pin | Control Type | Wire Color | | :--- | :--- | :--- | :--- | :--- | | | E5 (A) | 10 | Switched Ground (12V feed) | Blue | | Injector 2 | E5 (A) | 9 | Switched Ground | Yellow | | Injector 3 | E5 (A) | 8 | Switched Ground | Green | | Injector 4 | E5 (A) | 7 | Switched Ground | Red | | Igniter (IGT) | E5 (A) | 11 | 5V Trigger (Ignition timing) | White | | Fuel Pump Relay | E7 (C) | 4 | Switched Ground (Priming) | Green/Red | | VVT Solenoid | E5 (A) | 12 | Switched Ground | Blue/Yellow | 1nz ecu pinout

The Toyota 1NZ-FE is the legendary 1.5-liter inline-four engine found in the Toyota Prius (Gen 1 & 2), Yaris (Vitz), Echo, Scion xA, xB, and the Japanese-market Toyota bB. While reliable, electrical gremlins or swap projects often require a technician to interface directly with the Engine Control Unit (ECU) . The 1NZ-FE uses a simple ON/OFF VVT-i