Mikrotik Openvpn Config Generator ❲90% TRUSTED❳
<ca> ca_cert if ca_cert else "[INSERT CA CERTIFICATE]" </ca> """ return config
<ca> -----BEGIN CERTIFICATE----- [PASTE CA CERTIFICATE HERE] -----END CERTIFICATE----- </ca> <cert> -----BEGIN CERTIFICATE----- [CLIENT CERTIFICATE] -----END CERTIFICATE----- </cert>
config = f"""client dev tun proto proto remote server_ip port resolv-retry infinite nobind persist-key persist-tun remote-cert-tls server cipher AES-256-CBC auth SHA256 auth-nocache verb 3 mikrotik openvpn config generator
config = generate_ovpn(server, port, proto)
server = sys.argv[1] port = int(sys.argv[2]) if len(sys.argv) > 2 else 1194 proto = sys.argv[3] if len(sys.argv) > 3 else "tcp" <ca> ca_cert if ca_cert else "[INSERT CA CERTIFICATE]"
with open("mikrotik_client.ovpn", "w") as f: f.write(config)
:local ovpnPort 1194 :local ovpnProtocol "tcp" :local ovpnCipher "aes256" :local ovpnAuth "sha256" :local poolName "ovpn-pool" :local poolRange "192.168.100.2-192.168.100.254" :local localAddr "192.168.100.1" /ip pool add name=$poolName ranges=$poolRange Setup profile /interface ovpn-server profile set [find name=default] local-address=$localAddr remote-address=$poolName Setup server /interface ovpn-server server set enabled=yes port=$ovpnPort protocol=$ovpnProtocol cipher=$ovpnCipher auth=$ovpnAuth certificate=Server require-client-certificate=no Add firewall rule /ip firewall filter add chain=input protocol=$ovpnProtocol dst-port=$ovpnPort action=accept comment="OpenVPN Server" place-before=[/ip firewall filter find action=drop] Enable NAT for VPN clients /ip firewall nat add chain=srcnat src-address=$poolRange action=masquerade comment="OVPN NAT" """ return config <
if == " main ": if len(sys.argv) < 2: print("Usage: python ovpn_gen.py <SERVER_IP> [PORT] [PROTO]") sys.exit(1)