: On the Android device, change USB mode to “File Transfer / MTP” before connecting. Also, in Device Manager, uninstall the generic USB hub driver and let it reinstall. 7.3 High CPU Usage by System process when connecting MTP device Cause : Buggy MTP device or corrupted file on device causing infinite retry loops in wpdbusenum.sys ’s enumeration logic. Less common on Windows 10 than on 7.
Also relevant:
Modern Android and iOS devices use MTP precisely to avoid file system corruption and to keep media databases in sync. wpdbusenum.sys is the key that unlocks that model on Windows. 7.1 Driver Fails to Load (Code 39 or 49 in Device Manager) Symptoms : Device connects but does not appear under “Portable Devices” in Explorer. Device Manager shows “Windows cannot load the device driver for this hardware.” wpdbusenum fs driver windows 10
1. Introduction: A Driver You’ve Never Heard Of If you’ve ever plugged an Android phone, an iPhone (via iTunes), a digital camera, or a portable media player into a Windows 10 PC and watched files appear almost magically in File Explorer, you’ve directly benefited from a quiet, low-level system component: wpdbusenum.sys – the Windows Portable Device Bus Enumerator Driver .
HKLM\SYSTEM\CurrentControlSet\Services\WpdBusEnum Contains driver parameters, timeout values, and the Start value (default 3 = Manual). A crucial distinction: MTP (Media Transfer Protocol) vs. USB Mass Storage (UMS) . : On the Android device, change USB mode
In the future, as Windows evolves toward USB4 and faster bus architectures, the WPD framework – and wpdbusenum.sys with it – will likely be extended rather than replaced. The abstraction it provides (device-agnostic file transfer) remains too valuable to abandon. References: Microsoft WDK documentation, Windows Internals (Part 1, 7th Edition), MSDN blogs on WPD architecture, and reverse-engineering notes from the OSR Online community.
: wpdbusenum.sys times out waiting for the device to respond to WPD_DEVICE_INFO command. Common on Android devices with “Charging only” USB mode selected. Less common on Windows 10 than on 7
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\PnP → Add DWORD "LogLevel" = 0xFF Reboot and check %SystemRoot%\INF\setupapi.dev.log . Set breakpoint: